Appearance
Set Up the ZynoDisplay Touchscreen
WebWorkstationThe ZynoDisplay touchscreen is a purpose‑built 21.5‑inch device that ships with the player app already installed and configured. There's no app to download and no power‑saving settings to change — power it on, connect it to your network, and register it.
Inquire or purchase
To ask about the ZynoDisplay touchscreen or to order one, contact support@zyno.app.
Before You Begin
- A power outlet and a wired or Wi‑Fi network connection where the screen will live.
- You have the Register Device permission in ZynoSuite. See Permissions & Troubleshooting.
1. Power On and Connect
- Plug in the touchscreen and power it on.
- Connect it to your network — plug in Ethernet, or choose your Wi‑Fi network and enter the password on screen.
The player app starts automatically. There are no screen‑saver or power‑saving settings to change; the touchscreen is preconfigured to run continuously.
2. Register the Screen
On first launch the app shows a 9‑digit registration code. Enter it in ZynoSuite to claim the screen — see Registering a Device. Once registered, the screen pulls down whatever content you assign it.
Remote Controls
The ZynoDisplay touchscreen supports the full set of remote device controls from ZynoSuite — power, reboot, Wi‑Fi settings, and the LED ring around the screen. See Remote Control & Management.
Common Issues
| Problem | What To Check |
|---|---|
| The screen never shows a code | Confirm it's powered on and connected to the network. |
| Wi‑Fi won't connect | Re‑select the network and re‑enter the password; you can also change Wi‑Fi later from ZynoSuite. |
| The registration code is rejected | Re‑check all 9 digits against the code on the screen. See Registering a Device. |
| Questions about buying a touchscreen | Contact support@zyno.app. |